Bring worn pavers back with a full redo
Paver Restoration and Resealing in Cedar Hills, FL
Call (904) 842-3269 for a free quote to restore the faded, patchy pavers at your Cedar Hills home.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who can restore worn pavers at my Cedar Hills house?
A local contractor takes on paver restoration anywhere in Cedar Hills, and expect a reply within one business day, often well before. Looking over the pavers and quoting the work costs nothing, and you owe nothing if you pass. To begin, call (904) 842-3269.
Restoration is for pavers that have gone past a simple wash: a coat that is peeling or cloudy, joints that have emptied, patches of green and gray. Done right, the whole surface comes back even in color with full seams, instead of looking patched. Describe what you see when you get your free estimate.
How is restoring pavers different from sealing them?
Sealing assumes a sound surface. Restoration is the longer route, in which the old finish is dealt with, the pavers are deep cleaned, the joints are refilled and a fresh coat goes on. A Northeast Florida washing company says it is a three step process, and that it is not a same day spray. To see which fits your pavers, call (904) 842-3269.
The sorting question is whether the old coat is holding. If it flakes, clouds or peels, it has to come off first. If it only looks tired, a clean and a new coat may do. A contractor can tell by looking, so get your free estimate.
True
Why does sealer fail on pavers around Cedar Hills?
The usual cause is how the last job was done. A Northeast Florida washing company says sealing over dirt or wet pavers is a common reason jobs fail, and a paver company says a coat laid over a peeling one just peels again. Add about 52 inches of rain a year and a July high near 92 degrees, and a weak coat gives out. To check yours, call (904) 842-3269.
Sun, pool chlorine and storms also cut a coat's life to about two years, a washing company says. Seen another way, a coat that dies in a year or two was probably not set up right or was not suited to the spot. Share what you remember about the last job when you get your free estimate.
What are the signs my pavers need restoring?
Look for a milky or white haze, flaking or peeling film, joints that sit low or empty, weeds pushing up in seams and water that soaks in rather than beading. A Northeast Florida paver company treats fast soaking water as the sign a new coat is due. Several signs at once point toward restoration. For a quick opinion, call (904) 842-3269.
Orange streaks near sprinkler heads and green film in damp corners are separate stains that get treated during the job. Both are on the list a contractor walks with you when you get your free estimate.
True
What is the process of a paver restoration, step by step?
The order matters. The old coat is stripped if it has failed, the surface is cleaned and treated, kiln dried joint sand is swept in and settled, the pavers dry, and sealer goes on. A Northeast Florida paver company dries the surface for one to two hours and says damp is acceptable but standing water is not. To get a plan for your pavers, call (904) 842-3269.
That company floods sealer into the joints so every grain of sand is saturated, then rolls out puddles so the finish dries evenly. A washing company says the whole thing runs about two days when joints are empty or sealer has failed. If the schedule matters, tell them when you get your free estimate.
1. Strip
Failed or peeling sealer comes off instead of being coated over.
2. Clean and treat
Algae, rust and grime are cleaned off with the right product for each.
3. Re-sand
Kiln dried joint sand goes in, settles and gets topped off.
4. Dry and seal
A dry surface takes the coat, and puddles are rolled out.
Does restoration mean a pressure blast?
No. Unilock, a paver maker, warns that wrong pressure or nozzle settings can crack or wear pavers and blow sand out of the joints, and it keeps the spray angle at no more than 30 degrees. A Northeast Florida washing company washes with a soft touch and treats rust with a product, not force. To ask what method is planned, call (904) 842-3269.
The goal is a surface that looks clean without being scoured. Pavers that are etched or stripped of their face hold dirt sooner. Bring up pressure and nozzle choice when you get your free estimate.
What does paver restoration cost in Cedar Hills?
No page I read prices a restoration as one line, so the table is built from published pieces: cleaning from $0.22, sealing from $1.90 and a full clean, sand and seal at $1.75 to $3.25 per square foot. A washing company says stripping and resealing costs more when the old coat has failed. For a number on your driveway, get your free estimate.
Long Westside driveways add up fast, so measure matters more than anything. A bid far under the range often skips the strip or the joint sand, and those are the steps that make a redo last. Holding a quote? Call (904) 842-3269 and compare.
Want only a fresh coat? See paver sealing or paver cleaning.
| Restoration step | Published figure | Who published it |
|---|---|---|
| Deep cleaning | From $0.22 per sq ft | A Northeast Florida paver company |
| Refilling joint sand | No separate rate; part of the job | Both companies price it inside the full job |
| Stripping a failed coat | Costs more; no rate published | A Northeast Florida washing company |
| Sealing alone | From $1.90 per sq ft | A Northeast Florida paver company |
| Clean, sand and seal together | $1.75 to $3.25 per sq ft | A Northeast Florida washing company |
| Example: 800 sq ft driveway | $1,400 to $2,600 before any stripping | Math from the range above |
Sources: Stallone's Pro Wash (cleaning from $0.22, sealing from $1.90) and Safe Touch (the $1.75 to $3.25 range and the note that stripping and resealing costs more when the old coat has failed). No page I opened prices stripping or joint sand by itself, so those rows are plain statements and not invented numbers.
What do restored pavers look like around Cedar Hills?
Which sand goes back into the joints?
One Northeast Florida paver company uses kiln dried sand graded to ASTM C144 and brings samples in six colors to the estimate so the match can be seen on site. It says it avoids polymeric sand in Florida because it needs dry days to cure and can wash out in storms. To see samples for your pavers, call (904) 842-3269.
Joint sand does real work: it locks the pavers together and leaves weeds little room. A washing company says sealing over empty joints lets weeds return. Ask which sand is planned and why when you get your free estimate.
True
Can sunken or loose pavers be fixed during a restoration?
Not by sealer. A coat cannot lift a low paver, and sand cannot hold pavers that still rock. Those need the base fixed and the stones reset, which is separate work from restoration. Ask whether leveling is included when you call (904) 842-3269.
Cedar Hills sits between drainage ditches and a creek, and soft ground under a driveway can settle over decades. Point out dips and puddle spots when you get your free estimate.
Is a Cedar Hills driveway worth restoring or replacing?
When pavers are sound, a restoration costs a fraction of tearing them out. The brick and block ranches here were built with long driveways, wide front setbacks and attached garages, so the paved area is large and the savings grow with it. A contractor will tell you honestly when a section is past saving. To get that read, call (904) 842-3269.
Color is often what makes owners think of replacing. A fresh clean and coat can bring that color back without new pavers. See for yourself when you get your free estimate.
True
Which nearby places can book a paver restoration?
A local contractor covers Cedar Hills and the neighborhoods and towns below, across Duval, Clay and St. Johns counties. Choose yours, then call (904) 842-3269 or use the short form.
What do people ask before a paver restoration?
How much do people charge to seal pavers?
Northeast Florida companies publish $1.75 to $3.25 per square foot for a clean, sand and seal, and sealing alone from $1.90. A restoration costs more when an old coat has to be stripped first. To price your own area, call (904) 842-3269.
Is it good to seal pavers in Florida?
Usually, yes. A Northeast Florida washing company says summer storms wash the sand out of the joints, and a sealed surface holds sand better and rinses cleaner. To see where yours stand, get your free estimate.
How long do paver sealers last?
A Northeast Florida paver company says two to five years for its urethane sealer, and a washing company calls two to three years typical. Full sun, pool chlorine and storms can shorten that to about two. To check where your coat is, call (904) 842-3269.
How do I make my pavers look new again?
The route is clean, re-sand, then seal, in that order. A Northeast Florida washing company calls it a three step job, not a same day spray, and strips an old coat that has failed instead of covering it. To scope your job, get your free estimate.
What is the difference between sealing and restoring pavers?
Sealing puts a coat on pavers that are in decent shape. Restoration is the bigger job for pavers with failed sealer, empty joints or heavy growth, where the old coat comes off and the joints are refilled first. To tell which you need, call (904) 842-3269.
Can old paver sealer just be sealed over?
A Northeast Florida paver company says no. It strips peeling or failed sealer before resealing because a new coat over it traps the problem and peels as well. Wet or dirty pavers cause failures too. To have your coat inspected, get your free estimate.
How long does a paver restoration take?
A Northeast Florida washing company says empty joints or failed sealer usually mean about two days of work, and the crew tells the homeowner before starting. Weather can move the dates. To ask about your schedule, call (904) 842-3269.
Do I need new joint sand when pavers are resealed?
Often, yes. Summer downpours carry sand out of the seams, and one company refills with kiln dried sand graded to ASTM C144 before it seals. Another says sealing over empty joints lets weeds return. To have the joints checked, get your free estimate.
When should pavers be restored in Cedar Hills?
A washing company in the region names fall, because it is drier, and Cedar Hills rain runs about 52 inches a year, mostly May through September. Pick a dry stretch with the contractor. To look at dates, call (904) 842-3269.
Is an older brick ranch driveway in Cedar Hills worth restoring?
If the pavers are sound, usually yes. The Westside's wide front setbacks mean long driveways, so a restoration covers a lot of ground, and the price follows square footage. Loose or sunken pavers need a base fix first. To talk it over, get your free estimate.
Want a straight answer on your worn pavers?
Phone or send the short form. A local contractor writes back within 1 business day, usually much sooner, and the look is free.
Free, no obligation